[Rincon 650]

Couldn't you use a standard cigarette plug adapter?? This would supply power as well as ground.. just like the inside of the vehicle. This way, just unplug it and be gone... You could also run it from the cigarette plug down the frame to the rear where the cooler is and put a quick disconnect to make it easier and faster.. Just a thought..

The center is the positive and the side is the ground on the cigarette plug.

 

[Rincon 650]

I have tested the plug before with a test light and if I touched the sides, the light would not come on...When I touched the inside bottom ( the very back center ) the light would come on. I used to run my headlamp on my airboat to the cigarete plug and it worked great.. You can get the generic plugs from Auto Zone or Discount Auto. These come with a housing that you can unscrew to get to the wires. Just remember the bottom is hot and the sides are negative...You wll be fine as long as you are running 12 volt, it will be no problem...

You may want to solder (sp) it for a better connection. It's easy, you will be fine..

 

[Rincon 650]

By the way, if you are running a radio, you may have to hook a constant hot up somewhere so you can keep your pre set channels....