Honda Foreman Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3,444 Posts
Ditto on the 2500. Its not sealed. If you clean it periodically, and after every ride run it in and out to warm the motor, drying the water it will last a lot longer.
They work good, just require more maintainance. You may want to consider weight and amp draw as well.
 

·
Registered
Joined
·
3,444 Posts
I personally like them hidden as much as possible. Ideally you want it as high (out of mud and water) as possible. Look into the multi mount systems. That way you can use it in front and back.
 

·
Registered
Joined
·
3,444 Posts
Check Warn's website I think its warnwinches.com or Cycle Country sell the Montana Jack's mutlimount system. I beleive they both use a 1 1/4" reciever front and rear. Then a winch mount with a male 1 1/4" hitch.

My old SP500 had the multi-mount system on it. I don' thave pics where you can see it that well. The bumper would come off with two linch pins and could be moved to the rear, then the winch swithced to the front the same way. It only take seconds to swap out.
 
1 - 3 of 3 Posts
Top