Honda Foreman Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
23 Posts
Contactor location

I mounted mine in the storage box on the front fender! I just drilled a hole in the right side of the box to run the wires through. Then I put silicone around the hole to make sure water and mud do not get in. From the box the wires run through the hole in the fender where the fender brackets are located, then to winch. Everything works out perfect! The contactor box fits perfect in there, just put some velcro on bottom to keep from moving. Want pictures just reply and I will take some.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top