Honda Foreman Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
71 Posts
Discussion Starter · #1 ·
I have a stock 500 Foreman and i was wondering if it would pull 28 inch outlaws with no bogging down. or do i need 27s. i would rather have 28s. just seeing if it could pull them in stock from before i bought them.
 

·
Registered
Joined
·
3,444 Posts
It will not pull 27 Laws w/o bogging in most thick mud in stock form.. If you want to run something bigger than 27s, like 28s or 29.5 I would recomend using "skinnies" in the rear. To take some strain off the drive train.
 

·
Registered
Joined
·
1,649 Posts
QUOTE ("Truegrit":20gquh6b)
It will not pull 27 Laws w/o bogging in most thick mud in stock form.. If you want to run something bigger than 27s, like 28s or 29.5 I would recomend using "skinnies" in the rear. To take some strain off the drive train.
Do you mean it will not pull 28"Laws w/o bogging in most thick mud in stock form, or did you mean 27" like stated? I just want to make sure because I will be buying some Laws real soon.
 

·
Registered
Joined
·
744 Posts
Yeah i dont think it will stock but if you are planning on putting a pipe, jet kit, k&n it will with those mods
 

·
Registered
Joined
·
42 Posts
QUOTE ("Truegrit":14iddhh0)
It will not pull 27 Laws w/o bogging in most thick mud in stock form.. If you want to run something bigger than 27s, like 28s or 29.5 I would recomend using "skinnies" in the rear. To take some strain off the drive train.
I have been thinking about getting some 27" Laws or Vamps. Will the Laws kill most of my power while I am stock? How about compared the same size Vampires or Mudzillas?
 

·
Registered
Joined
·
744 Posts
Any of the three are going to kill your power from stock
 

·
Registered
Joined
·
744 Posts
It kinda depends on what size you are going if you are going to go with a 10 inch wide or a 12 inch wide tire............ the 27X12X12 vamps are the biggest that you can get in a vampire unless u go with the 28 inch edls which i have on the front but when you blow them up they blow up to 28 inches not 27........Honestly i would go with a 26 inch if you are going to stay stock you will be able to turn them in the thick stuff alot easier then the 27's but if you think in the future that you will put some mods on get the 27's
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top