Honda Foreman Forums banner

WHEEL STUDS

11678 Views 9 Replies 9 Participants Last post by  DT400
ARE THE WHEEL STUDS PRESSED IN OR CAN YOU BEET THEM OUT, CALLED HOUSE OF PAIN AND THEY SAID YOU COULD NOT REPLACE JUST THE STUDS YOU HAD TO BUY A WHOLE NEW HUB. 61.00 FOR FRONT HUB FOR ONE BROKEN STUD( THAT IS BULL SH--) 34.00 FOR THE REAR HUB AND THIS PRICES ARE FOR EACH CORNER. HONDA HAD THERE HEAD UP THERE A-- WHEN THEY BUILT THIS BIKES. SEEMS LIKE IM FIXIN IT MORE THEM IM RIDEING IT, OR BOTH EVERY TIME I RIDE I GOTTA FIX IT.

I HAVE ONE BROKEN STUD ON RIGTH FRONT, OVER TIGHTEN. JUST WANT TO FIX THIS ONE BROKE STUD CAN IT BE DONE ?
1 - 10 of 10 Posts
vaughn look here <a href="http://www.hondaforeman.com/phpBB2/view" target="_blank">http://www.hondaforeman.com/phpBB2/view ... wheel+stud</a> , also I have to brand new hubs at my house it you are interested. 40 bucks each for the hubs
ill take both of them, if i cant replace the 1 stud. thanks for link. rob pm me and let me know how i can pay you and getem.
dang rod, you should have told me that when i broke all 4 of mine off last weekend....i put a post in here....i would have gotten my sis to buy them off of you when she picked up the tires.....my shop warrantied mine so i'm not out of anything but it would be nice to have a back up.


<a href="http://hondaforeman.com/phpBB2/viewtopic.php?t=3797" target="_blank">http://hondaforeman.com/phpBB2/viewtopic.php?t=3797</a>
I replaced studs on TRX500FE before .. Same wheel studs other TRX models use ..
I had a feeling that the " House Of Rip Off " was up to no good. Vaughn, you may have been able to change those out. Thats their way of robbing you of more money...
went through the same thing last year. it isnt just house of pain that says you have to replace the whole hub... read this


<a href="http://www.hondaforeman.com/phpBB2/view" target="_blank">http://www.hondaforeman.com/phpBB2/view ... ight=studs</a>
that link doesn't work deadmullet.
I'm probably not doing it right though :(

I stripped two of my wheel studs and thinking I can just go to any auto parts store and pick up a couple dorman studs to match?
Just press out the old studs, press new ones in.

If the whole hub was supposed to be replaced, why does Honda sell replacement studs?

90103-HN0-A60 BOLT, WHEEL (10X32) $4.13
Just like others mentioned pop out the bad ones install new ones done and back on the trail...as long as the hub isn't damaged there is no need to replace it.

Darrell
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top