Honda Foreman Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
206 Posts
Discussion Starter · #1 ·
What PSI should i run my 589's? By mistake i inflated them to 25 psi! I looked at the little guage and it only marks to 5psi so i assume something in between that is norm, but what do you all like to go with?
 

·
Registered
Joined
·
278 Posts
I run 4 in my mudlites. Ive ran as much as 7 but it seems to ride rougher at 7. 4psi seems to be just enough to make it ride better.
 

·
Premium Member
Joined
·
3,440 Posts
We run 10lbs in ours.
 

·
Registered
Joined
·
2,694 Posts
10lbs. here as well, riding in ruts here tend to knock the tire off the rim with anything lower than 10
 

·
Registered
Joined
·
188 Posts
QUOTE ("MiamiE":2ewdzxh2)
What PSI should i run my 589's? By mistake i inflated them to 25 psi! I looked at the little guage and it only marks to 5psi so i assume something in between that is norm, but what do you all like to go with?

You need a low pressure tire gauge. You can get at Walmart or auto parts store.
 

·
Registered
Joined
·
206 Posts
Discussion Starter · #7 ·
Isnt the guage that comes with the tool kit good enough?
 

·
Registered
Joined
·
3,444 Posts
Yes that one will work. I think the stock gauge reads 05 psi. I run 12psi myself, The tire would ride better w/ little less pressure though.
 

·
Registered
Joined
·
278 Posts
I would say it depends on what kind of riding you do most.
If you only ride mud the Higher psi might help you make it further with less bead loss.
But if you ride mostly trails the lower psi makes for a nicer ride and better grip over trail obsticles
 
1 - 9 of 9 Posts
Top