Honda Foreman Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter · #1 ·
Hi all,
I've got an '87 TRX350D which ran good but a little smokey up until recently. The final drive bearing died and some needles from it went up into the generator which locked up the motor.
While I have the motor out I want to get it bored and put in a new piston and rings to hopefully solve my oil burning issue.
I'm thinking of putting in the Wiseco "1987 Honda TRX350 Piston Kit - 0.50mm Oversize to 81.50mm, 10.25:1 Compression ", do I tell the shop to bore it to 81.5mm or is that the size of the piston so the cylinder needs to be bigger?
Thanks in advance
49718
 

·
Registered
Joined
·
477 Posts
Any good machine shop would know how much to bore out if they have the piston
 

·
Registered
Joined
·
477 Posts
Any good machine shop would know how much to bore out if they have the piston
 
1 - 5 of 5 Posts
Top