[selah86]

last night i took my 4man in deep deep water for the first time. it never died on me, it ran like a champ. i went through water up to the handle bars for a few hundred feet. i have all my vents ran up to my POD, my carb drain is pinched in half and zip-tied. and its snorkeled. after being deep for a while it would die when i gave it full throttle, so i drained my carb then it worked fine.
Question: how did i get water in my carb with all these mods? is there something else i should do or know about?

 

[selah86]

thats the same thing i did with the zip-tie. i dunno where water in getting in at. i've never had this problem before, but i have never riddin in deep water for as long as i did last night. i was prolly about 30 min straight in deep water. a sand bar here and there. but the majority of the time my handle bars and snorkel were the only things you could see.

 

[selah86]

after reading this.... <a href="http://www.triangleatv.com/Tips-Page.html" target="_blank">http://www.triangleatv.com/Tips-Page.html</a> .... is it possible that i had no water in my carb? could it be possible that from ridding at an "upward" angle for such a long time that the carb was full of fuel and therefore would not start back up?