Honda Foreman Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
OK SO I HAVE AN 07 FOREMAN MANUAL SHIFT. I FINALLY GOT THE OIL COVER FROM WWW.MOTOSPORT.COM GREAT PLACE TO BUY PARTS FROM CAME QUICK AND NOBODY HAD IT BUT THEM... OK SO I WANT TO START BUYING SOME OTHER PARTS FOR THE BIKE.. HERE IS THE LIST.
HMF SLIP ON FROM HIGHLIFTER.COM
JET KIT FROM HIGHLIFTER.COM
LIFT KIT FROM HIGHLIFTER.COM
HIGH LIFTER SPRINGS FROM HIGHLIFTER.COM
BISON FRONT AND REAR BUMPERS FROM ???? ANY SUGGESTIONS

SHOULD I GET A CLUTCH KIT ALSO OR NO?

ALSO IM RUNNING 27 INCH 589'S BUT I WANT TO BE ABLE TO PUSH AT LEAST A 28 INCH OUTLAW UP TO A 29.5 ONE DAY...

ALSO I WILL BE MAKING A SNORKEL SO I NEED TO REJET RIGHT? SHOULD I JUST WAIT UNTIL I GET THE EXHAUST AND DO IT AT THE SAME TIME...???

ANY HELP OR SUGGESTIONS IS GREATLY APPRECIATED EVEN IF ITS ON A NEGATIVE COMMENT TOWARDS SOMETHING IM PURCHASING...THANKS JUST TRYING TO LEARN AND GET THE INPUT FROM YOU GUYS AND GIRLS...
 

·
Registered
Joined
·
305 Posts
If you make your snorkel like I made mine you should not have to rejet since it is a copy of the kit that triangle atv sells and they say you do not need to rejet. I put my snorkel on the same time I put on my pipe so I just rejeted for the pipe and it runs great. On the second page there is a complete list of the parts I used. http://www.hondaforeman.com/phpBB2/viewtop...der=asc&start=0
 

·
Registered
Joined
·
108 Posts
Yea,I'd get a Clutch Kit.that'll help pull tires TREMENDOUSLY!!!!!!With them add-on's your gett'n,you should be able to spin them 29's no Problem!!!BUT GET THEM ADD-ONS BEFORE YOU GET ANY NEW TIRES!!!!And you should re-jet for that pipe you are gettin' and an air-filter kit,then you'd have a Power-Packed beast!!!
 

·
Registered
Joined
·
90 Posts
ok help me here whats an oil cover?
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #5 ·
oil cover.

the oil cover is the part that you take off to change the oil filter... i sunk my bike in about 7 feet of water and i had to change my oil... well i broke the metal cover i guess from over tightening it but it just seemed to fragile i feel it was a mistake from the honda mechanics at the dealer ship bc they just changed the oil for me about an hour b4 i sunk it.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top