Honda Foreman Forums banner
1 - 1 of 9 Posts

· Registered
286 Posts
the specs at .004 when first checked is usually due to the valves getting set into the valve seat after some break in wear.leave them at .006 that is a pretty close tolerance for a valve actually.remember most chevy v-8's running a mechanical roller cam are in the .016-.024 range so .006 is darn close.a human hair is .003.
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.