Honda Foreman Forums banner
1 - 1 of 4 Posts

· Registered
Joined
·
517 Posts
Like Dirty said, carefull with how much lift you go with. I originally did a 2" lift and was replacing ball joints left and right. I lowered the front by 1" and left the rear alone. By the time you sit on it, it just about levels out. I have 26" Mudlites on a set of 12" Grizzly rims. Got the rims for peanuts and had to get a set of moose 1 1/2 spacers that widen out the rear by over 3". Seen guys take Rincon rims and turn the rear backwards for the right off set.
 
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top