Honda Foreman Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
352 Posts
I dont know if the rincon carb is same as foreman but on mine there is alittle black cover on the side of the carb and it was packed with mud. took cover off cleaned it out and lubed it up with some wd40 no more problems. the mud wouldnt let the throttle release all the way.
hope this might help ya.
 

·
Registered
Joined
·
3,444 Posts
QUOTE ("Vaughn":xfoctqeq)
I dont know if the rincon carb is same as foreman but on mine there is alittle black cover on the side of the carb and it was packed with mud. took cover off cleaned it out and lubed it up with some wd40 no more problems. the mud wouldnt let the throttle release all the way.
hope this might help ya.
I have had to do that a couple times as well.
 

·
Registered
Joined
·
122 Posts
Discussion Starter · #5 ·
QUOTE ("Vaughn":1ptkacjm)
I dont know if the rincon carb is same as foreman but on mine there is alittle black cover on the side of the carb and it was packed with mud. took cover off cleaned it out and lubed it up with some wd40 no more problems. the mud wouldnt let the throttle release all the way.
hope this might help ya.

BINGO.........


You nailed it,,seems to work fine now,,,,Thanks for the advice

Round man
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top