Honda Foreman Forums banner

TDC question.

1281 Views 2 Replies 3 Participants Last post by  Honda Mechanic
Where is the index mark located on the crank for TDC. This is on an 05 Foreman. Is ther some type of inspection sight??? Thanks.
1 - 3 of 3 Posts
The best way to go about finding t.d.c. is to remove the spark plug put a 1/4" drive 6" extension in the jug until it touches the top of the pistion. then turn the motor over by hand until the extension has reached its highest point. is the motor out of the bike? A dial indicator would be helpful to get it within +/-.002 or two thousandths
The TDC inspection hole is on the right side just above the foot rest .. It is removed with a 6mm allen socket....
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.