Honda Foreman Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2,694 Posts
I checked into this for another guy with a ruby,since the the swingarms are so short. From the pivot point to the center of the axle is 16" and at the swingarm bearings measure end to end about 10.5" or should I say side to side. Its under $200 for the swingarm tube wtih bearings and the rear drive shalf. But you will also need longer brake cables, maybe foreman 450 shocks. Not for sure on the shocks

Hopes this helps
 

·
Registered
Joined
·
2,694 Posts
if everything else fits, Also you should be able to reuse your swing are pivot bolts. The 450 brake cables should take care of that issue as well.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top