Honda Foreman Forums banner

Swingarm Bearings

1502 Views 1 Reply 2 Participants Last post by  AllHonda
I have a popping noise coming from the back somewhere, I think Ive narrowed it down to the swingarm bearings cause the rear diff is only about a year old and the rear wheel bearings looked good when I had it apart a couple months ago. It only seems to pop whenever the rear end is loading or unloading. Anyone ever experienced this? Or could it be that u-joint between the motor and the swingarm?
1 - 2 of 2 Posts
If you get behind the bike,shake the bike side to side. Watch the swing arm,if its loose it won't move with the rest of the bike. Try tighten the pivot bolt first b4 replacing them,that maybe all it needs.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top