[dirty4man]

Yello i am running 1.5" custom snorkel and custom exhaust, but I am using a oem 135 jet instead of the dyno jet kit. This jet should put you close with some minor adjustments on the stock needle and air/fuel mixture. Most any atv shop will carry the oem replacement jets for around $3-$5

 

[dirty4man]

That's alittle high for oem jets. I have had better luck using oem jets on different bikes. The only thing about buying single dyno jets is that you still need the dyno needle to go with them. on the oem jet you can still use the stock needle.