[dirty4man]

yes its real easy. I have a spring loaded toggle. It only takes two wires to hook it up. One wire will need to run to the silinoid under the seat and the other can be tied into one of the hot wires coming from the key switch. the hot wire on the key switch already is run through the fuse box, so no inline fuse will be needed.

 

[dirty4man]

No you will have to hook up to one of the smaller wires on the silinoid, there are only two small wire but I dont remember the color of it. just get a test light and hit you starter button to see which one is hot and splice into it.