OK, the problem i'm having is when I am at a high RPM then let off the gas fully to idle it will often stall out. It seems to me as if it's flooding out.
carb is set up to dyno-jets recommendations, clip on the 3rd notch, 2 1/2 turns ect......
Do you guys that have the same set up think maybe moving the e-clip on the needle up one grove will help it run better?
BLACK!! lots of carbon build-up, how is the best way to adjust for a little leaner, clip on needle? AF screw? smaller jet? I don't want to fry the piston
but the way it looks am running to rich.
BLACK!! lots of carbon build-up, how is the best way to adjust for a little leaner, clip on needle? AF screw? smaller jet? I don't want to fry the piston
but the way it looks am running to rich.
if its real bad then go to smaller jet. i believeif you screw a/f screw in it will cut back on the fuel. i was fouling out real bad and had to change out jet to smaller one.
hope this helps.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Honda Foreman Forums
537.3K posts
43K members
Since 2005
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon