Honda Foreman Forums banner


1387 Views 2 Replies 3 Participants Last post by  572SmithSS
when i sit on my fourwheeler or pull on the handle bars it makes a sqweaking noise is there a grease fitting or something to stop this
1 - 3 of 3 Posts
I use a light lubricant between on the shaft to take care of the squeek.There are no fittings on the top of the steering shaft it looks like there should be being every foreman I know of has some of the same problems.
I just did this a couple weeks ago, take the metal clamp thing off the rubber bushing near that top of the steering shaft then you should be able to pull the bushing out, clean the old junk off regrease put it back together, no more squeaking and easier turning.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.