[hunteradams]

Hey my speedometer is not working.. My neutral and reverse lights work but its not showing me my speed, time or any of that stuff. I was wondering if there was some kind of fuse that may have blown or do I just need to buy a new one.. Cause if they are that expensive I don't need one that bad... But I was wondering if it may just be something simple to fix..

 

[Honda Mechanic]

What model & year.. I take it that it's a TRX450 what model & year

 

[hunteradams]

Its a 2000 Honda Foreman 450ES....

 

[Sage6058]

More than likely, your speed sensor is out. My '01 Foreman's speed sensor went out. It in turn made my ES stop working. I could ride but once I rode for a minute or so, the ES would start blinking and nothing would work. I replaced my speed sensor and everything works fine.

 

[AKATV]

Foreman 450 Speedometer Repair Before & After Pics

I just finished repairing a speedometer display with heavy sun UV burnout for our member LedFTed this morning I wanted to show results of UV damage repair, other than the reprogramming that I do Before and after pics below- my phone reflection in 2nd picture- not screen defect .....😊

atvhonda.com

 

[Sweeney t]

More than likely, your speed sensor is out. My '01 Foreman's speed sensor went out. It in turn made my ES stop working. I could ride but once I rode for a minute or so, the ES would start blinking and nothing would work. I replaced my speed sensor and everything works fine.

. We’re is the speed sensor located thanks

 

[Sweeney t]

We’re is the speed sensor located??

 

[Sweeney t]

More than likely, your speed sensor is out. My '01 Foreman's speed sensor went out. It in turn made my ES stop working. I could ride but once I rode for a minute or so, the ES would start blinking and nothing would work. I replaced my speed sensor and everything works fine.

Location for sensor

 

[JimmyBurns]

Location for sensor

On the left rear of the eng/trans assembly above the shift shaft. Has three wires pointing straight up and the harness goes across to the right rear wheel well by the rectifier, where it plugs in. Can be gotten from partzilla pretty quickly.

 

[JimmyBurns]

Location for sensor

Forgot, before you replace that, check that the power supply to it is good. Should be 12v between the two outer pins. That power and ground need to be good to get output from the sensor.