Honda Foreman Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
1,215 Posts
Discussion Starter · #1 ·
We wanna snorkle Tyler's 350. Does anybody know of a kit, OR are there any mods that can be done to the kit for the 450 to make it work on his bike???
 

·
Premium Member
Joined
·
1,740 Posts
Just get some spa tubing and make one yourself. We did on my buddies we used 1 1/4 I think. If it is getting to much air the just put a cap on it and put a hole in it to give it enough air flow.
 

·
Registered
Joined
·
1,215 Posts
Discussion Starter · #3 ·
Yeah, I guess that's what we are gonna have to do. Shane said he would make one, but I just thought if we could find a kit somewhere it would be easier! Thanks Neal!
 

·
Premium Member
Joined
·
1,740 Posts
It is always fun for me when I built mine, I think I am going to redo the one on my foreman soon. You will save a lot plus I don't think I have ever seen one for sale for those.
 

·
Registered
Joined
·
3,444 Posts
Forewoman, Shane should be able to use 1 1/4 pool/spa hose, w/o much problem. either run it out the side ogf the motor along the out side of the fender, or run it like your 450's snorkit, through the fender. Then just yop it off w/ a PVC riser.
 

·
Registered
Joined
·
1,215 Posts
Discussion Starter · #6 ·
Okay, guess he will just have to get creative and do it himself! That or keep rebuilding that motor!! I wonder why they don't sell one for that bike??? Maybe one day. THANKS!
 

·
Registered
Joined
·
19 Posts
Euro and Rinny (Derek and Chad) snorkled my rancher with no problems and it is actually better than Derek's at times. I have not had any water in my box. They used 1 1/4 inch spa hose and a 90 degree PVC at the end. It works great. They did have to cut a hole in the plastic. Let me know if you want pictures.
 

·
Registered
Joined
·
1,215 Posts
Discussion Starter · #8 ·
Thanks! I don't mind the hole in the plastic, mine has one too. Hopefully Shane can "rig" it so it works good! I'll let ya know if he needs pictures!
 

·
Registered
Joined
·
6 Posts
We wanna snorkle Tyler's 350. Does anybody know of a kit, OR are there any mods that can be done to the kit for the 450 to make it work on his bike???
abs or pvc plumbing pipe and plumbing glue 1.5 inch start with a small strait piece to a 90 degree to another run of strait and another 90 degree and finish pipe with a strait with a hole saw drill bit right through fender and when I say strait measure what u need seal airbox and where pipe enters airbox home made and then patten idea just saying
 
1 - 9 of 9 Posts
Top