Honda Foreman Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
171 Posts
Discussion Starter · #1 ·
I was wondering if anyone had a pic of their bracket that they used to hold the snorkle in place over the fender
 

·
Registered
Joined
·
744 Posts
Here ya go use diamond plate with a threaded male adapter going through the diamond plate then use a female threaded adaptor on the top of the diamond plate this way you can take it off if you need to or even make larger and smaller ones for differant conditions
 

·
Registered
Joined
·
29 Posts
i just used a bunch of cheap zip ties and keep about 10 extra in the back and it does fine.
 

·
Registered
Joined
·
56 Posts
I got my idea from Rincon 650. Made this bracket so I could come up from the middle plastic piece. Hope this help.
 

·
Registered
Joined
·
53 Posts
Whats the point in having two snorkels??? More air flow? or is it necessary.
 

·
Registered
Joined
·
29 Posts
QUOTE ("freek589":1ydccuey)
Whats the point in having two snorkels??? More air flow? or is it necessary.

yes it was for more air flow but i found out it has more low end power with one plugged so for the type of riding i do i just keep one plugged. But their 1 1/4 in so i thought i would need two... but i was wrong. Not necessary. but it will cut out at high speeds with one plugged.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top