snorkel jetting?

QUOTE ("04foreman":1j96t82w)

have stock exhaust and stock air filter with 2" snorkel reduced down to 1.5" into air box runs good when choke is up but cuts out when choke is down should i rejet and if so what size? or could i just move the clip on the needle? need help!

Click to expand...

i used to have the same problem all i did was turn the air/fuel mixture screw a couple of turns i cant remember which way

QUOTE ("04foreman":2zbl3ij2)

have stock exhaust and stock air filter with 2" snorkel reduced down to 1.5" into air box runs good when choke is up but cuts out when choke is down should i rejet and if so what size? or could i just move the clip on the needle? need help!

Click to expand...

i used to have the same problem all i did was turn the air/fuel mixture screw a couple of turns i cant remember which way

with just the snorkel no jetting is needed. Just move the needle clip (down) and fine tune the air fuel mixture if needed. If you dont feel comfortable messing with the carb, just reduce the air flow on the inlet of the snorkel with a PVC reducer or maybe even tape till it starts running right.