[natedizzer]

i'm having the same problem on mine....i just installed a snorkel using 2" pvc for the pipe out of the top of the breather box and for the extension above the fender and I used 1 1/2" flex tubing to run between the two. When i get to the top end of the gears it studders pretty bad. I didn't know if I should jet the carb or what. I did extend the tail pipe as well but it was doing the same thing before i did that

2005 foreman 500
26" mudlites
snorkel


any info would help

 

[natedizzer]

i don't know if you can tell but on my riser i used to have a "U" shaped fitting on there and i was cutting out a lot worse than i am now so i cut the U and faced the opening toward the front of the bike to force the air in and that helped alot but it still struggles on top end...how much would a jet kit cost for the 500?