Honda Foreman Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
670 Posts
Discussion Starter · #1 ·
snorkel on a budget...i hate doin things this way but i don't have the cash to fork out for pvc or hose...i will be using whatever i find laying around the shed...

so what do you ppl think, make the snorkel come out the front center or the right side fender...????

which would be easier... i can't decide

i will post up come pics...
 

·
Registered
Joined
·
670 Posts
Discussion Starter · #3 ·
i looked at that already, but there is no place around here toget the parts.

i have pvc pipe just laying around. i just don't know where i should drill the hole for the front....
 

·
Registered
Joined
·
1,021 Posts
I know you don't want to spend alot of money, but the WetVac accessory kit from Home Depot for $24 and a 95 cent PVC 90 degree elbow will do all. Not much for a snorkle... And will work great..
 

·
Registered
Joined
·
670 Posts
Discussion Starter · #6 ·
ok...i am frustrated. i know this is easy and simple to do, i know i can do it.

i am running 2" pvc (b/c thats what i have) from the airbox, down the right side of the tank. i had to cut two holes in my fender well for the pipe to go through. but now i am trying to get it to go up under the front behind my winch. so that i can make it come straight up through that lil plate, right in front of my pod light. the newest dilemma is the pipe is contacting my right front shock. i may have to wait until next paycheck to by some pittings so that i can go around behind the shock and up the middle. i could make it come out of the top of my fender and strap it to my rack but i think that is cheesy... i got a few pics of it before i starting cuttin and with the plastics off...pay no attention to the dirt.

the reason i don't go get the hose is b/c i live 45 min from home depot and wally world don't got it (my wife works there). now i DO have a long piece of hose that is 2" but it is very thick and stiff and i can't route it through there.

i am just annoyed at this point.
 

·
Registered
Joined
·
1,021 Posts
Yup...Looks like that will work...
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top