I know you guys have said in the past that 27 inch zillas would fit without a lift and wouldn't rub. I was looking at a set of 14 inch wheels with 27x10x14 front 27x12x14 rear zillas. Being that the tires are wider than the 12 inch version do yall think they will still fit without rubbing. Really like the set up but don't want a lift or have to cut do to the 4 year warranty i have. Thanks.
bforemanes
I highly doubt those will fit. I have a 4yr too on mine as well, but being my buddies own the shop It doesnt matter whats done to it. A good dealer would still accept what you have. Besides a mechanic would never notice a modded front fender bracket, and lifts are just as easy to take off as they are to put on.
I think they will fit without much of an issue. The aftermarket wheels will give you a touch more off set so it will clear the exhaust but you might have to tweak the front fender braces???not sure on that. I'm not sure if the 14's run short, true or tall.
On a scale of 1-10 10 being the hardest.... 3 maybe. As long as you can read and own a ratchet you're fine.... It took me an hour n a half by myself..... if I had an extra hand prpbably an hour.
Kipes has 6000 miles on his with no problems I have a bit over 1000 with no problems.
E-bay is where I got mine. There should be some on there.
Kipes has 6000 miles on his with no problems I have a bit over 1000 with no problems.
E-bay is where I got mine. There should be some on there.
h34r::lol:
Yep but once you have parts in hand and can tell rear from from its as simple as un bolting the shock, putting the spacer/lift in place and bolting it back up. It shouldnt be a problem for ya tee, its pretty simple. Also it did come with instructions that tell you which parts are for the front and rear, once you figure that out (takes all of 2 minutes) its a fairly simple process.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
