Honda Foreman Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
1,123 Posts
i will not hurt anything, are you planning on putting big tires on these wheels? some bigger tires might rub on the exhaust.
-Aaron
 

·
Registered
Joined
·
23 Posts
Discussion Starter · #3 ·
QUOTE ("MAD MUDDER":14ulpifp)
i will not hurt anything, are you planning on putting big tires on these wheels? some bigger tires might rub on the exhaust.
-Aaron
No i wanting to run them with the stock tires from the rincon just wanted to make sure it wouldnt hurt anything putting the rims on backwards i know the offset is different from the stock foreman rims..the rincon makes the rims stick out further...
 

·
Registered
Joined
·
2,694 Posts
Honda takes a acorn style lug nut which has a tappered end and the rim has a tapper in it to accept the acorn nut. by turn the rims around backwards you are going to damage the holes on the rims. I would say it's a bad ideal.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top