Honda Foreman Forums banner

Reverse spit and sputter with no power

763 Views 1 Reply 2 Participants Last post by  bc buck
When I try to go in reverse it just spits and sputters and goes really slow. I pulled the code and I got 10 blinks. I already replaced a sensor below the heat shield on the left side of the motor and that didn’t help. Please help. TIA
1 - 2 of 2 Posts
Make sure right hand brake safety switch is push forward open position. This was on a 500.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.