Honda Foreman Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter · #2 ·
when i put my quad in reverse it kind of studers and cuts out and it will barely move. if im in snow or mud and i try to reverse and it will stall. i used to be able to start it in reverse and know it won't. what could be causing this and how can it be fixed. thanks it runs like new going forwards, so maybe something is wrecked in the transmision.i think i will have to take it to the dealer soon to see if they know what is going on.

This is a problem for a guy on another site i belong to
I don't know much about rubies hydrostatic tranny's
 

·
Registered
Joined
·
34 Posts
are there any code faults, when in forward can you get any speed out of it, almost sounds like the angle sensor is not working angle sensor code is 5 blinks, I've replaced 3 sensors stutters in reverse and won't go over 15km/h in forward Good Luck
 

·
Registered
Joined
·
88 Posts
your shift sensor is bad or needs adjusting. look at the sensor under the shifter and make sure it is working properly
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top