Honda Foreman Forums banner
1 - 20 of 23 Posts

·
Premium Member
Joined
·
1,740 Posts
QUOTE ("flipstick":177slhfh)
Looking for a high output halogen replacement bulb for my main (upper)
headlight.
Already installed PIAA H6M bulb in lower headlights.
PIAA H6M BULB
Thanks for any input in advance.
Would that bulb work in the 500's or are they different?
 

·
Registered
Joined
·
3,177 Posts
QUOTE ("flipstick":4f65kpsn)
Looking for a high output halogen replacement bulb for my main (upper)
headlight.
Already installed PIAA H6M bulb in lower headlights.
PIAA H6M BULB
Thanks for any input in advance.
Did those bulbs make a good difference? As hot as it gets here in the summer, night riding is a good option.
 

·
Premium Member
Joined
·
1,740 Posts
QUOTE ("Robb":1ivm2p88)
QUOTE ("flipstick":1ivm2p88)
Looking for a high output halogen replacement bulb for my main (upper)
headlight.
Already installed PIAA H6M bulb in lower headlights.
PIAA H6M BULB
Thanks for any input in advance.
Did those bulbs make a good difference? As hot as it gets here in the summer, night riding is a good option.[/quote]

we ride a lot at night, those woud probably be a good addition.
 

·
Registered
Joined
·
514 Posts
I thought the top light was already a halogen? Has anyone replaced the back lights with LED lights? Know a place or part number?
 

·
Registered
Joined
·
2,072 Posts
If somebody finds a bulb for the 05' Foreman let me know, that would be a nice upgrade
 

·
Premium Member
Joined
·
3,440 Posts
How much of a differance do the other bulbs make than the factory set up?
 

·
Premium Member
Joined
·
3,440 Posts
Thanks! Will have to get some.
 

·
Registered
Joined
·
350 Posts
QUOTE ("harry":34nycpp0)
I thought the top light was already a halogen? Has anyone replaced the back lights with LED lights? Know a place or part number?
I replaced my back taillights with LED's, I got them from www.radlights.com, they did not pop right in though, I had to shave some of the inside of the bulb housing off, and then, I epoxied the bulb to the taillight assembly, I also did a brake light mod at the same time, so the LED was a three wire. I havent done anything with the fronts yet, mostly because they are always covered in mud.

Russ
 

·
Registered
Joined
·
119 Posts
Discussion Starter · #18 ·
QUOTE ("Mudlord":2ac7mj3e)
I replaced my back taillights with LED's, I got them from www.radlights.com, they did not pop right in though, I had to shave some of the inside of the bulb housing off, and then, I epoxied the bulb to the taillight assembly, I also did a brake light mod at the same time, so the LED was a three wire. I havent done anything with the fronts yet, mostly because they are always covered in mud.

Russ
Do you have any detailed instructions on this modification ?
 

·
Registered
Joined
·
350 Posts
Flipstick,
I will have to go over to Highlifter and find the post where I did all of this. Having brakelights are really nice when you ride with a big group! LOL
I will search for it and post a link to it!

Russ
 

·
Registered
Joined
·
350 Posts
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top