Honda Foreman Forums banner
1 - 1 of 7 Posts

· Registered
34 Posts
I had to remove the ignition also to replace the headlight cover after I rolled it on a gravel road. The connector is easy to get to. Its a white connector located just inside the left front tire attached to the frame. Once you unplug the connector it will feed up through the other wires in the steering column. I tied a string to the connector before I pulled it through. After inserting the ignition throught the new plastic I retied the string to the plug and pulled back through the same path as before.
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.