Honda Foreman Forums banner
1 - 1 of 3 Posts

· Registered
2,679 Posts
only 4 bolts holding it in place. once you get it off just use a water hose to flush it out real good, let it dry and lubicate it real good. this would also be a good time to seal it up. The best way is to completely taking it apart, but some dont feel comfortable with the spring inside. if it comes unwound, it can be a B to wind it back up.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.