Honda Foreman Forums banner

Rear brakes

1846 Views 3 Replies 4 Participants Last post by  Railroader
I gotta change the brakes. Are there any problems or things that I'm gonna run into that you guys help keep me away from. Any tips or tricks. Thanks
1 - 4 of 4 Posts
its a straight forward job, just clean and grease the o-ring seals before reinstalling them. The only thing i would suggest is change to brake cover seal while your there and inspect the bearings.
The thing the axle nut has around 100lbs of torque on it, so an impact or long breaker bar would be nice.
QUOTE ("Truegrit":26c1renw)
The thing the axle nut has around 100lbs of torque on it, so an impact or long breaker bar would be nice.
Unless your Superman like me .
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top