Honda Foreman Forums banner
1 - 1 of 3 Posts

· Registered
133 Posts
no you dont have to remove all the plastics. The only one i had to remove was the one tank panel on the right side of the bike. The hoses were easy to put on. I used hose clamps on the nipples that come out of the diif. and the rear brake, a ziptie on the fan and just added on to the factory vents on the carb and sealed them off with zipties. I put a screw in the carb drain and hose clamped it sealed. It probabally took me 10 15 mins at the most.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.