Honda Foreman Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
Can anyone on here give me a rough quote on a valve job and a rebore and piston job... pretty much just a top end job... please let me know ASAP
 

·
Registered
Joined
·
3,177 Posts
bore and hone, about 50 bucks, valve job, maybe 100 bucks, are you doing the unassembly/reassembly yourself?
 

·
Registered
Joined
·
2,694 Posts
guessing u would be looking at about $250.-$300. in just parts if u get honda to do it and plus whatever labor they charge. the labor will probably around the same as what the parts cost. so get ready to drop some money. most people do this work themself to save money
 

·
Premium Member
Joined
·
1,740 Posts
It is not that hard, just get yourself a manual and go at it. Take your time and have all of the machining done at a quality machine shop. Doing it yourself you will save a fortune.
 

·
Registered
Joined
·
2,694 Posts
once u see someone do it, its not that bad. Its not something to jump in to and do if u have no clue of whats involved, a manual will explain how and help u do the job,
 

·
Premium Member
Joined
·
1,740 Posts
Yes that is what I am talking about, you can probably find one pretty cheap on ebay.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top