Honda Foreman Forums banner


9408 Views 24 Replies 7 Participants Last post by  Dale07Foreman
bike ran like a champ before i installed in. followed instructions fron rincon650 and everything went together just fine. the bike starts, i cover the snorkel and the bike dies. i go to drive it and at part throttle or wide open she runs like ****. spits and sputters. i pull the choke and it made no difference at all. it seems its worse at part throttle. before the install i had a jet kit put in and the settings were-- 165 jet, and the needle set on the 3rd clip, and 2 1/2 turns out.

please help, i'm trying to go out this weekend
1 - 1 of 25 Posts
awesome slidell!!!

i got mine done the other day...all 2"pvc pipe...all i have to do is paint it and vent the lines up...

it may not be done for another couple of days b/c i am a [email protected]$$ and i have been REALLY busy at work....

but when i am done i will post some pics up fer ya to check out and let me know what you think...

this website rocks!!!
1 - 1 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.