Honda Foreman Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hey guys I was hoping someone on here with more experience than me could help.
Here's what's going on.

Recently I had an issue with my bike popping out of first gear, so I pulled the motor and opened it up. I found the the countershaft dog and first gear were worn so I swapped them out with parts from a spare motor. The parts I replaced them with looked to be in very good shape, no signs of wear on the dog and just little on first. Nothing that I thought was concerning. Well after putting everything back together and installing everything it's starting to do it again. It only does it in first, and when it's under load like from thick mud or really loose sugar sand. I'm wondering is there something else I could check? And does anyone have any ide where I could find these parts new? They places I normally buy from don't have them. Tia
 

·
Premium Member
Joined
·
6,271 Posts

You need an updated 1st gear set
 

·
Premium Member
Joined
·
6,271 Posts
See third post in that thread.
 
1 - 4 of 4 Posts
Top