Honda Foreman Forums banner

Pod

2000 Views 4 Replies 3 Participants Last post by  eric
Trying to get the ignition out of pod, do you have to unplug from harness or can you split the ignition switch somehow. Having a **** of a time.
1 - 5 of 5 Posts
you need to unplug the ignition switch from the wiring harness. it is a round white connector w/ four wires. can't remember exacltly where its located on the frame. w/out cutting the wires, this is the only way to remove the switch from the machine.
Thanks
The connector is natural color 4P ..It is under the left inner fender on the frame down tube ..
Found it, thanks a lot guys!!
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top