Honda Foreman Forums banner
1 - 1 of 14 Posts

· Registered
2,679 Posts
as the atv gets alittle age on them, the holes start getting bigger from stress. u can apply a 1/4" or 10mm flat washer on the backside of the fenders and apply the clips and this will keep it snug. This way will still alow them to pull out if needed. The bolts will rip out the holes if they get snagged on something.
1 - 1 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.