Joined
·
3,337 Posts
Well, i have finally popped in . I tried the Dynojets on both of ours & none
of the jets worked. We both have snorkels, so that could've been a reason
why they didn't work well. All i did to ours was replace the main jet with a
oem 135 on our 450 Foremans & boy howdy, they both ran like a ape with
its butt on fire. I just moved the little clip on the stock needle all the way down
to the last groove & added a washer & it worked great. Adjust the air/fuel
screw to about 2.5 to 2 & 3/4 turns out. This is for a 450 Foreman.
of the jets worked. We both have snorkels, so that could've been a reason
why they didn't work well. All i did to ours was replace the main jet with a
oem 135 on our 450 Foremans & boy howdy, they both ran like a ape with
its butt on fire. I just moved the little clip on the stock needle all the way down
to the last groove & added a washer & it worked great. Adjust the air/fuel
screw to about 2.5 to 2 & 3/4 turns out. This is for a 450 Foreman.
