Honda Foreman Forums banner

North Texas (1200 ft elev.) Jetting

1238 Views 4 Replies 2 Participants Last post by  dwconn
I have an 07 TRX500FPE and looking to re-jet for best performance. At this time I have a stock exhaust with a power tip. ( The tip is just to open up the stock exhaust a little) I have a Dynojet jet kit on hand. I just wondered if any of you have used this kit and what jeting you ended up with.. Thanks for the input..
1 - 5 of 5 Posts
I think I have answered my own question.. DynoJet data sheet calls for a DJ170 below 3000 feet...
If I'm not mistaken the DJ170 is for under 3000 with an after market high flow baffled muffler, not stock muffler.

I would use the DJ165 with the stock muffler w/ K&N filter. Thats what I did anyway and she runs like I stole it!!!!!!!!!!!!!!!!
You are correct...
You are correct...
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top