Honda Foreman Forums banner

No spark!

540 Views 0 Replies 1 Participant Last post by  Rex
Hey guys new here. I have a 05 rubicon with no spark. I changed the coil and plug for a tune up. Cranked it up ran fine. Replaced the carb (tune up) lost spark. Dead man tested good. Replaced stator, rectifier, crank position sensor. Barrowed a different computer for it. I’m getting 110 volts BEFORE it gets to the coil. I was thinking it should be 12v any thoughts??
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.