Honda Foreman Forums banner
1 - 1 of 9 Posts

· Registered
226 Posts
If you haven't put it back together I would fill the bearings with a good waterproof grease. The first time I redid my left front bearing, I took off the knuckle assembly and took it to a Honda dealer for replacement. They put in the same original equipment bearing that is not sealed. It lasted about a year and a half. The second time I did the bearing I replaced it myself with an aftermarket sealed bearing. They have the plastic covers at both sides covering the rollers. Hasn't been replaced since!!
1 - 1 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.