Discussion Starter · #1 ·
Ok so today for the first time in two years i got the bike started. What a good feeling. I changed the oil, oil filter, coolant, battery, cleaned the carb, cleaned the bike, aired the tires, but couldnt take it for a ride (it still has a busted a-arm). Anyways my question is this. Im currently running an HMF exhaust, KN intake, and Dynojet kit. Im running either the 155 or 160 jet. I have the DJ140, DJ150, DJ148, DJ146, DJ144, and the DJ142 left over. Am i running the right jet for my current setup, running 93 gasoline? The bike has SOME trouble staying on and has a low idle which im sure can be fixed with a simple bumping up of the carb. The bike seems sluggish in the mud and i know with all these mods it should feel BETTER than stock and it really doesnt at all. Any and all help is appreciated, im slowly trying to get back into riding! I would also like to know possible reasons why my quad could be overheating after no use for 2 years and a recent coolant change. I cleaned the radiator thoroughly today and still after only an hour long, the red light was on. Thanks guys!