[marcust]

From all that I have read about jetting The A/F screw is used to adjust 0-25% throttle, the clip on the needle adjusts 25-75% and the main jet adjusts 75-100%.
This thread from highlifter might help also.
http://www.highlifter.com/forum/Basic_CV_C..._1872049/tm.htm

 

[marcust]

QUOTE ("Portman123456789":ls30w1ax)

I found that that problem I was having was cause by either the 1.5" spa hose I was using was to small in diameter or the way I routed the hose.It was not allowing enough air into the airbox.So I made a new snorkle using Marcust's setup.and put a 170 main jet and needle on the 3rd slot down and now the bike run's great.But I think I am going to try a 175 main jet and see how it run's.I will post the results when I try that.Thank for the post Marcust!

No prob most of the stuff I know I learned from people on here so just trying to give back. Where do you usually ride? Have you ever go to 5A?