Honda Foreman Forums banner
1 - 7 of 16 Posts

· Registered
Joined
·
104 Posts
Discussion Starter · #1 ·
I just built a 30 x 30 2story garage on my house. I had all this room over my steps going down in my basement so I built a heavyduty shelf & put my ATV on it. now its out of my way until I need it.[/img]
 

· Registered
Joined
·
104 Posts
Discussion Starter · #3 ·
QUOTE ("#48FAN":33v64tdv)
Thats actually a pretty cool idea. How you do you get it up and down, do you have a bi-fold ramp?
I built a set of 10 foot rampsout of 2x8 with a 2x6 running down the middle of the bottom & one inch pices of 3/4 inch plywood a foot apart for traction. I plan on making a pull down ramp that I can lower from the celing with a rope. Like a draw bridge.
 

· Registered
Joined
·
104 Posts
Discussion Starter · #6 ·
QUOTE ("JWJR":2ymvdrsf)
you could putt it on hinges and make it fold up or pull up and latch close so peope dont even know it is there
that is kinda what I was thinking of doing.
 

· Registered
Joined
·
104 Posts
Discussion Starter · #10 ·
QUOTE ("CardRon":1fsymov6)
That space is cool, and scary at the same time. When you build the ramp just be sure you don't have all the weight on the existing shelf. I would make a separate support just for the ramp. Also a cheap 120volt winch would be perfect to raise and lower it with no effort. Check out like Harborfreight tools. Can usually find one for like $60 and a 1500# will be more than enough. Sorry, just my habit. I'm a builder by trade and when I see things like this I always get into it. Nice Job, Let us see when you get the ramp done.

Ron
I have a small comealong (spelling) LOL I plan on using. I guess Its going to be put on hold till after the hip gets better.
If you are a bilder by trade you would love to see pics of the garage I just built. PM me your email address & I will send you more pics of it.
 

· Registered
Joined
·
104 Posts
Discussion Starter · #12 ·
Man that is GREAT I thought mine was good but you just shot me DOWN big time. LOL
 

· Registered
Joined
·
104 Posts
Discussion Starter · #16 ·
QUOTE ("shooterman":28ckx94p)
sorry zipper, didn't mean to steal your thunder. it's a squeeze to get to my drill press and tool boxes but it was impossible before this setup.
Hey man I dont care. I like to see other peoples ideas. LOL
 
1 - 7 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top