Going down to your fan is two wires & a vent pipe. There's one blue wire & 1 green wire. Tee into the blue wire as high up as you can & waterproof it. The wire that you tee'd into, run it up to the pod, as this is where you will mount the toggle switch & connect the wire to toggle switch. On the other terminal of the toggle switch run a wire back near your battery & mount a 15amp waterproof inline fuse protector. On the other side of the fuse protector, run that wire to the positive side of your battery and your all set.....
1 - 2 of 10 Posts
manual fan switch
PM'd ya.
PM'd ya.
1 - 2 of 10 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Honda Foreman Forums
Honda Foreman Forums: Discuss the latest Honda Foreman in our free Honda Foreman forums. Also talk about Honda's other ATV and UTV's including the Honda Rubicon, Honda Rincon, Honda Rancher and Honda Recon
Full Forum Listing
Explore Our Forums
Recommended Communities
Join now to ask and comment!
