Honda Foreman Forums banner

Making lift on a foreman

1296 Views 2 Replies 3 Participants Last post by  dirtyrider6104
i am going to make a lift my self and i was wondering if i can go 4" or 5" with the stock front end on my bike without anything going wrong. Like CV shafts breaking or anything like that? thanks
1 - 3 of 3 Posts
the factory drivetrain will not be able to handle that much angle.
gorilla is your only way of going if you are going to go that high...... even 2 inch lifts are hard on the stockers
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.