Honda Foreman Forums banner
1 - 1 of 15 Posts

· Registered
30 Posts
Made a homemade lift like the one on the website posted here, wiith on change, i used 2.0 inches center to center instead of the 1.5 inches. It gave me about 3.5 inches of lift. However when it is on the jack the cv joints are stressed and rubbing, does this mean it is too much. I don't want to blow it out if i get a wheel off the ground. With it on the ground and the weight on it it does fine, no rubbing and is smooth riding. Let me know what you think.
1 - 1 of 15 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.