Honda Foreman Forums banner

Jetting Experts

1159 Views 3 Replies 4 Participants Last post by  selah86
i am putting on a HMF slip on and a k&n air filter. i was thinking of putting i a 175 main jet, i live in Houston so it is pretty hot down here and my elavation is about 0. would a 175 main, work??? thanks
1 - 4 of 4 Posts
Sounds rich to me. Better to start to rich and work your way down though. You'll know right away when you're at full throttle.
i dont remember if i put a 170 or 175 on mine....
i also live in houston

try the 170 first, take it up and down the block and if it doesnt sound like its running good, go to 175

just follow the instructions for the needle and clip... they work perfect
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top